| 
|
-
Home
> Tongue Jacks and Winches |
Tongue
Jacks and Winches
FULTON Trailer Winches
See Part Numbers in Chart Below |
7612
|
| •
Heavy duty reinforced frames maintain proper gear alignment.
• Zinc plated finish for superior corrosion resistance.
• Comfort grip handle provides a positive hold while
cranking.
• Please order by Draw-Tite part number. |
| Part
No. |
Qty. |
Fulton
Model No. |
Description |
Gear
Ratio |
Capacity
(lbs.) |
| 7612 |
1 |
C1500Z |
Winch with
20 Feet Strap and Hook. |
4.1:1 |
1,500 |
| 7613 |
1 |
CS600 |
Winch without
Strap or Hook. |
3.1:1 |
600 |
|
Tongue
Jacks and Winches
A-Frame Mounted Tongue Jacks
See Part Numbers in Chart Below |
| |
| •
Includes triangular mounting bracket for easy bolt-on or
- weld-on mounting.
• Casters install quickly and lock into "Key Slot"
on jack ram.
• Caster and jacks are ordered separately.
• Mounting hardware is not included.
• Please order by Draw-Tite part number.
|
| |
|
-
Fulton
Model
No. |
-
-
Description |
-
-
Overall
Capacity
(lbs.) |
|
|
C
-
Outer
Plate
Attachment |
-
-
Tube
Dia. |
| -
TOP
WIND JACKS
|
8820 |
1 |
TBD |
Top Wind
Tongue Jack - Primer Finish. |
1,000 |
20" |
14" |
6" |
1-7/8" |
2611 |
1 |
155022 |
Top Wind
Tongue Jack - Primer Finish. |
2,000 |
19" |
14" |
7" |
2-1/4" |
2613 |
1 |
TBD |
Top Wind
Tongue Jack - Primer Finish. |
5,000 |
19" |
14" |
9" |
2-1/4" |
| - SIDE
WIND JACKS |
8821 |
1 |
TBD |
Side Wind
Tongue Jack - Primer Finish. |
1,000 |
22" |
14" |
6" |
2-1/4" |
| 2612 |
1 |
155157 |
Side Wind
Tongue Jack - Primer Finish. |
2,000 |
22" |
14" |
7" |
2-1/4" |
Note
1: "Travel" is the amount of extension of the inner
ram tube of the jack. |
Tongue
Jacks and Winches
Swivel Mount Tongue Jacks
See Part Numbers in Chart Below |
-
8822
8823
- |
-
8825 |
-
2614
8824
|
|
| •
Reduces the amount of cranking required to provide road clearance
when
- jack is not in use.
• Jack swings easily to a position parallel with tongue,
providing out of the
- way storage.
• Caster is built onto the inner ram of the jack. Ideal
for boat trailers and
- tent campers.
• Dynamic Lift Capacity - all jacks are designed to
lift plus support their
- rated load.
• Protective Lubrication - jack screw is covered with
a formulated long lasting
- lubricant.
• High Strength Tubing - large diameter jack tubes are
manufactured from
- high strength, low-alloy tubing.
• Corrosion Protection - jack tubes are painted with
electro-deposited
- enamel, formulated to exceed
the A.S.T.M. 96 Hour Salt Spray Test.
• Please order by Draw-Tite part number.
|
| |
|
-
Fulton
Model
No. |
-
-
Description |
-
-
Overall
Capacity
(lbs.) |
|
|
C
-
Outer
Plate
Attachment |
-
-
Tube
Dia. |
| -
TOP
WIND JACKS
|
8822 |
1 |
158451 |
Top Wind
Tongue Jack with Foot. |
2,000 |
14-1/2" |
10" |
6" |
2-1/4" |
8823 |
1 |
TBD |
Top Wind
Tongue Jack - Primer Finish. |
2,000 |
18-1/2" |
15" |
7" |
2-1/4" |
8825 |
1 |
151401 |
Top Wind
Tongue Jack - Primer Finish. |
2,000 |
14-1/2" |
10" |
9" |
2-1/4" |
| - SIDE
WIND JACKS |
2614 |
1 |
TJ503 |
Side Wind
Tongue Jack - Chrome. |
800 |
26" |
11" |
6" |
2-1/4" |
| 8824 |
1 |
TJ1055 |
Side Wind
Tongue Jack - Chrome. |
1,000 |
23" |
10" |
7" |
2-1/4" |
-
Note 1: "Travel"
is the amount of extension of the inner ram tube of the jack. |
Tongue
Jacks and Winches
Casters and Skid Feet
See Part Numbers in Chart Below |
-
-
2615
8826 |
-
-
2616 |
|
| •
Zinc plated finish resists corrosion.
• 6" x 2" reinforced poly caster wheels provide
easy rolling and good ground
- support.
• Caster, Skid Feet, and Jacks are ordered separately
except where noted.
• Please order by Draw-Tite part number. |
| |
|
Fulton
Model
No. |
Description
|
Capacity
(lbs.)
|
| -
CASTERS
|
8826 |
1 |
CE111 |
Tongue
Jack Caster for 8820 and 8821. Includes Attachment Pin and Clip. |
1,000 |
2615 |
1 |
CE555 |
Tongue
Jack Caster for 2611, 2612, and 2613. Includes Attachment Pin
and Clip. |
5,000 |
| - SUPPORT
FEET |
2616 |
1 |
F2000 |
Tongue
Jack Skid Foot for 2611, 2612, and 2613. Includes Attachment
Pin and Clip. |
5,000 |
|
| - |
-
Home
> Tongue Jacks and Winches |
|
